-
Ceramic Allround C0.01 is a ceramic coating which can be used on a variety of surfaces to provide long-lasting protection.
-
Wax Sealant for hand application Premium wax sealing for a hydrophobic, high-gloss paint surface. Hand Wax W0.01 contains premium carnauba wax which seals and ensures a long-lasting protection of treated surfaces. The sealing components create a smooth surface with advanced hydrophobicity. The result is a considerably brighter, high-gloss finish. Only a small amount of Hand Wax W0.01 is needed in order for it to be highly effective, making it very economical.
-
Koch Chemie Heavy Cut H9.01 Coarse polishing compound, silicone-oil-freeÂ
Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches, and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint (both soft and scratch-proof). Cut: 8,5 Gloss: 5,0 Recommendations for use: Apply in a crosswise motion with a rotary polisher and a lambskin pad (for sanding traces of 1,200–2,500) or the Heavy Cut Pad (for sanding traces of 2,000–5,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with Micro Cut M3.02 for the best possible finish. -
High-gloss Polish with Sealant Innovative machine polish for quickly producing high-gloss surfaces and for effectively removing scratches and grindings from a grit size of P2000 and above with a simultaneous sealing effect. Cut: 6,0 Gloss: 8,0 Areas of use: Paints on cars, commercial vehicles, motorcycles, etc. Recommendations for use Apply using a high-performance orbital polisher and a One Step Pad in a crosswise direction. Apply the high-gloss polish at a medium speed with medium pressure. Container Warnings Safety data sheet available on request for trade users. Shake before using. Protect against frost and excessive heat. Do not use on hot surfaces. Before using, check suitability and compatibility. Notice This product information can advice you only without obligation. Liability on our part can not be derived. Please check whether the product is suitable for your application. We will be pleased to assist you.
-
Koch Chemie M3.02 Micro Cut Anti-Hologram Finishing Polish compound Micro Cut M3.02 is the latest generation machine micro-polish for the permanent removal of streaks, holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant). Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut M3.02 is extremely economical, easy to polish and removable without leaving traces. Cut: 3,2 Gloss: 9,0 Usage: For optimum results we recommend using our Micro Cut Pad and an orbital polisher with forced rotation (eg Makita PO5000C, highest speed). Alternatively a rotary polisher can be used in combination with our Micro Cut Pad. Before use, moisten dried or new pads completely with polish. With the machine switched off, apply the polish evenly over the surface to be treated and then polish crosswise with medium pressure until a transparent film appears, ie, until the aluminium oxide in the polish has completely broken down. Do not use pads used with this product for other products. For non-scratch and groove-free removal of polish residues we recommend our non-chainstitched Profi microfibre cloth that has been ultrasonically cut.
-
Koch Chemie Fine Cut F6.01 - Fine polishing compound, silicone-oil-free Intelligent machine polish of the latest generation with unique aluminium oxide quality. The intelligent grain size ensures very quick, complete removal of wash system scratches and similar traces of use and gives the paintwork a long-lasting deep sheen. Sanding marks left behind by 2500 grade sanding media are removed effortlessly. Fine Cut F6.01 is therefore ideally suited for perfect reconditioning of medium to heavily weathered paintwork. Perfectly coordinated for the treatment of scratch-proof paint. Cut: 6,0 Gloss: 7,0 Recommendations for use: Apply the fine polishing compound to the polishing pad (Fine Cut Pad or lambswool pad) and polish the precleaned surface with max. 2.000 rpm crosswise. The cleaning effect can be varied by means of pressure, polishing medium and rpm. At the start of the polishing process we recommend working with greater pressure at a lower speed. In the further course, reduce the pressure and polish to a high gloss at a higher speed. The remaining polish residues can be removed easily with our Profi ultrasonic cut microfibre cloth. Remove any streaks or traces of polish with Micro Cut M3.02.
-
Micro Cut & Finish P3.01 Micro Cut & Finish P3.01Micro polishing compound with carnauba wax Micro Cut & Finish is the latest generation machine micro-polish for the permanent removal of streaks,holograms, fine scratches and sanding marks to P3000 grain size on all paint systems (including scratch-resistant) with simultaneous long-term sealing with high degree of gloss and smoothness. Through the use of highly specialised, extremely homogenous abrasive bodies, a brilliant permanent high gloss finish is created under extreme light conditions even on dark and similarly sensitive shades. Holograms and fine scratches are eliminated mechanically and not, which is often the case, covered over. Micro Cut & Finish iseconomical, easy to polish and to remove. Contains carnauba wax and non-fugitive silicones. Cut: 3,2 Gloss: 9,5 Areas of use Paintwork of cars, commercial vehicles, motor cycles, etc.
-
Innovative machine polish for fast reworking of heavily weathered paintwork, elimination of deep scratches,and effective removal of paint mists and sanding traces of up to 1,200 grain. With its extremely homogeneous abrasive grain, Heavy Cut 9.01 achieves an extremely high level of cut with an excellent gloss level. Can be polished for prolonged periods without sticking and with low dust formation. Ideally suited to all types of paint(both soft and scratch-proof). Cut: 9,0Gloss: 5,0Areas of use Paintwork of cars, commercial vehicles, motor cycles, etc Recommendations for use Apply in a crosswise motion with a rotary polisher and a lambskin pad (for sanding traces of 1,200–2,500) or the Heavy Cut Pad (for sanding traces of 2,000–5,000). Apply polishing compound at medium speed and with medium pressure. Polish afterwards with Micro Cut M3.02 for the best possible finish Warnings Shake before using. Before using, check suitability and compatibility. Do not use on hot surfaces. Protect against frost and excessive heat. Notice This product information can advice you only without obligation. Liability on our part can not be derived.Please check whether the product is suitable for your application. We will be pleased to assist you.
-
Cleaning clay, abrasive Removes even stubborn deposits such as tree resin and insects, rust bloom, industrial dust, spray mist, tar, limescale stains, etc. gently from smooth surfaces such as heavily weathered / dirty paintwork and glass. Optimal for intensive cleaning before the polishing process or before fitting new windscreen wipers. Not recommended for new paintwork because subsequent polishing is necessary.
-
High-gloss Headlight Polish with Sealant Innovative machine polish for a rapid creation of a high-gloss surface on pre-treated PMMA headlights, for effective removal of sanding scratches from P 2000 grit with simultaneous sealing effect.
-
Heavy Cut Headlight Polish Siliconoil Free Innovative machine polish for fast reworking of heavily weathered PMMA headlights, elimination of scratches, and effective removal of sanding scratches from P 1000 grit.
-
The perfect cloth for streak-free cleaning and drying of glass. The unique weave guarantees excellent dirt loosening ability and streak-free drying in combination with Glas Cleaner or Allround Surface Gleaner. The 320g/m² heavy towel with its strong overlocked edge is very durable and allows repeated washing. In combination with Glas Star (Gs) also ideal for removing wax residues and greases. 2 yellow and 2 grey towels (e.g. for wet-cleaning and drying).
-
Interior plastic trim semi-matt Premium care emulsion for deep pore cleaning and freshening plastic and rubber parts such as consoles, interior trim, seals, etc. Top Star creates a long-lasting, semigloss, natural sheen and protects the surface permanently against new dirt and UV radiation. Special active ingredients keep plastic supple, have an antistatic effect and provide a new and attractive look. With fresh fragrance. With Daimler approval.
-
Premium leather care with a natural semigloss finish. For revitalising and preserving smooth leather, suede and perforated leather materials on vehicle seats,sofas,etc.Leather Star is easy to use and creates a pleasant fragrance, a colour intensifying appearance and a supple and soft feel, without causing undesirable slipperiness. The use of premium active ingredients from cosmetics makes the leather supple and provides prolonged protection against new dirt and becoming brittle. Areas of use Smooth leather, suede and perforated leather materials (motor vehicles, furniture, etc.) Recommendations for use Clean the dirt first with a suitable cleaner (eg Pol Star), wipe with damp cloth and dry thoroughly. Shake Leather Star before use, apply evenly and extensively to the leather surfaces with a sponge or soft microfibre cloth and leave to dry. Remove any excess with a soft cloth. Warnings Before using, check suitability and compatibility. Notice This product information can advice you only without obligation. Liability on our part can not be derived. Please check whether the product is suitable for your application. We will be pleased to assist you.
-
Solid, acid-resistant Vikan rim brush with long handle. Ideal for precleaning in wash systems. Small handy version. Ideal for hard to reach areas on the rim.
-
Metal-free, acid-resistant rim and engine brush with high-quality natural bristles and plastic holder to prevent scratching.
-
Sale!SpeedGlassCleaner Ready-to-use glass cleaner for all smooth surfaces on vehicles, buildings, etc. Effortlessly removes the most stubborn dirt including oil, grease, insects and similar. Runs off quickly without streaks and its gloss and smoothness additive improves the wiping effect of the cleaning cloth. With fresh fragrance.
-
Medium abrasive sponge for removing moderate weathering and scratches using the One Cut and Finish P6.01. The short height of 23mm creates low torsion forces, very good handling and the highest level of stability. The special density of the foam material enables long-lasting compression hardness during polishing. The optimised reticulation (open cellular structure) and cell count contributes to a high level of abrasiveness and excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety. Compression hardness: 12. Abrasiveness: 5.
-
Extra-fine finish sponge for economically and evenly applying sealing products such as the 1K Nano or Lack-Polish grün P1.01. The short height of 23mm creates low torsion forces, excellent handling and the highest level of stability. The optimised reticulation (open cellular structure) and cell count contribute to excellent hygiene factors. The milling edge ensures extra flexibility for the pads, enabling them to fit around contours easier. The colourful non-woven material, suitable for polishing, ensures process safety. Compression hardness: 4. Abrasiveness: 2.
