Coatings

Showing 1–16 of 23 results

  • 3 Aerospace Protectant really is like “SPF 40 Sunscreen … For Your Stuff.”

    303 is THE LEADER in UV Screening Technology. Regular use gives 100% Prevention of UV caused slow-fade with regular use.  No other “protectant” beautifies as intensely, protects as powerfully or lasts as long.

    The World’s Most Manufacturer-Recommended Product:
    Because of its enduring cosmetic properties, the resistance of 303-treated surfaces to dust, soiling, and staining, its water repellency and unparalleled protective characteristics, manufacturers worldwide recommend 303 Aerospace Protectant.

    303 Aerospace Protectant keeps UV-sensitive materials “like new” year after year.

    Interior/Exterior: Vinyl & leather Interiors, plastic bumpers, fender flares, trim and lenses, car bras, tonneau covers, vinyl soft tops & Plastic windows, chrome and alloy wheels. Spray on, wipe dry.

    Synthetic & Natural Rubber:
    for inflatable boats, wet/dry suits, tires, door & trunk seals and under-the-hood rubber. Spray on, wait 5 min. & wipe dry.

    RV EPDM Rubber Roofing:
    Clean surface. Spray on mop on 3×3 foot area. Wipe dry. For your safety, never walk on wet roof.

    Fiberglass:
    RV’s boats, truck caps. Out of direct sun, spray surface with 303 and wipe completely dry. If streaking occurs, too much product has been used. Use a wet towel to remove excess, immediately wipe dry.

    Motorcycles/ATV’s/Jetski’s,boats, PWC’s:
    Spray on wipe dry & polish to a high gloss. Also for gear… helmets, visors, goggles. Repels dirt, insects, snow ice and road grime.

    Household: Patio furniture, spa and pool covers, vinyl liners & pool inflatables. Not for unfinished leathers (such as suede), fabrics (canvas) or floors.

    Application:
    Spray on, wetting the surface with 303. Wipe COMPLETELY dry. Turn cloth over to a dry area (or use a second clean, dry, absorbent cloth) and polish to remove any and all excess.
    Following these simple instructions.getting the surface wet (not just damp) with 303, then wiping COMPLETELY dry.will give you a beautiful, like-new finish that repels soiling and stains and LASTS LONGER.

  • The 303 Convertible Top Cleaner utilises a unique “colloidal” action to lift and suspend oil, grease, fall out and dirt making it extremely effective whilst being extremely safe. It cleans deep down and leaves no residue like most cheap cleaners. It does not contain soap, detergents, toxic organics, phosphates, nitrates or caustics.

    Combined with 303 High Tech Fabric Guard which is powerful enough to protect fabrics in the harshest environment – outdoors. The Fabric Guard restores lost water repellency and stain repellency to factory new levels, whilst resisting soiling, impeding mildew formation and helping protect against the sun’s harmful UV rays.

    For best results spray the complete convertible fabric roof with the Cleaner and massage in with a soft bristled brush, leave to work in for a few minutes and then rinse off with clean water. For very best results or very dirty roofs, repeat this cleaning step. Then allow your roof to dry completely.

    Following this spray a light coating of Fabric Guard over the roof and again allow to dry for a couple of hours, for very best protection spray a second coat.

    • Safe for use on all fabric convertible tops
    • Protect your convertible top against dirt, dust, bird droppings, tree sap & more!
    • Fast cleaning, removes stubborn stains
    • Hith Tech Fabric Guard™ restores oil & water repellency
    • Protects against soiling & staining
    • Adds years of life to tops

    Usage Instruction:
    Rinse thoroughly to remove loose particulates, solids & debris. While the area is still wet, apply 303 Tonneau & Convertible Top Cleaner. Agitate lightly with a dampened soft nylon brush, terry cloth rag or sponge. Rinse thoroughly with clear water. For difficult soiling, let cleaner stand for 10-20 minutes, then scrub lightly to loosen the soiling/stain. Rinse thoroughly. (Always rinse before surface dries.) Warmer temperatures, agitation & longer dwell times aid the cleaning action. In cold temperatures, allow cleaner to work longer before rinsing. Always work under shade in a cool area.

  • Keep your convertible in tip top shape with 303 Fabric Convertible Top Kit!

    The 303 Convertible Top Cleaner and the 303 Aerospace Protectant are everything you need to keep your convertible top looking like new. You’ve no doubt seen what can happen to a neglected vinyl topover time: drying, cracking and fading. Even if your vehicle lasts forever, your vinyl convertible top might not if you don’t take care of it.

    That’s why we offer both the 303 Convertible Top Cleaner and the 303 Aerospace Protectant together in the 303 Vinyl Convertible Top Kit. In just two steps, you can remove oil, grease, and dirt from your top and provide the best protection available for vinyl. 16 oz. Convertible Top Cleaner 303 Convertible Top Cleaner utilizes a unique “colloidal” action to lift and suspend oil, grease, and dirt so that it easily wipes away. This same colloidal action was found to break up oil slicks on the ocean.

    It contains no soaps or detergents that can dry or leave a residue. Also, the environmentally safe formula contains no toxic organics, phosphates, nitrates or caustics to irritate your skin or run off into your yard. All 303 cleaners are safe, non-toxic and 99% biodegradable. While 303 Convertible Top Cleaner is safe to use, you can be sure it’s effective because it bares the 303 name.

    303 is unparalleled in the auto care industry for cleaning and preserving vinyl. You can also use 303 Convertible Top Cleaner on walls, kitchen appliances, carpets, motors, light fixtures, countertops, and bathroom fixtures – anything water-safe.

    •     Fast cleaning, removes stubborn stains
    •     Protectant restores original color-Protects against staining & sun damage
    •     Adds years of life to tops & covers-Fast cleaning, removes stubborn stains
    •     Protectant restores original color
    •     Protects against staining & sun damage
    •     Adds years of life to tops & covers
    • Strengthens and restores water repellency
    • Greatly increases stain resistance
    • Maintains colorfastness
    • Keeps fabrics soft and breathable
    • Safe for synthetic and natural fibers

    303® Fabric Guard keeps fabrics fresh, soft, colorful and breathable…all while adding a powerful coating to repel water and prevent the most serious of stains. Use it to keep rugs clean, leather interiors fresh and covers blemish-free. You can even spray it on your convertible top’s seams to prevent wicking. When applied to clean and dry fabrics, 303® Fabric Guard restores lost water and stain repellency to straight-from-the-factory levels. Keep all your favorite fabrics crisp and clean for years to come.

    Usage Directions:

    Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas.

    NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.​

    Example Use Cases

    Patio Cushion

    • Untreated: Cushions are stained and water soaks into the fabric..
    • Treated with 303 Fabric Guard: Water and soil repel from the fabric, prolonging its life.

    Umbrella

    • Untreated: The umbrella is stained from outdoor elements and rain.
    • Treated with 303 Fabric Guard: Water and soil repel from the fabric and it is protected from outdoor elements.
  • Kit Contains:

    – 1 HD Nitro Seal Part A
    – 1 HD Nitro Seal Part B
    – 1 Red Applicator
    – 1 Black Applicator
    – 1 Microfiber Towel
    – 1 Latex Glove
    – 1 Instruction Sheet
    – 1 Nitro Seal Box (UPS orders only).

    *Orders shipped with USPS Flat Rate Small Box will not include the Nitro Seal Box

    WARNING: This product can expose you to chemicals including Ethylbenzene which is known to the State of California to cause cancer. For more information go to

  • Coatings FEYNLAB® CERAMIC

    Product Benefits

    • FEYNLAB® CERAMIC is a thick, durable, and economical high-solids professional nano coating with straightforward application.
    • Certified installers may offer CERAMIC at a competitive market price while equaling or surpassing other brands in terms of durability and performance.
    • Ease of application for a high solids coating was a priority during CERAMIC’s development. This innovation quickly distinguished it from the competition. CERAMIC is exceptionally forgiving with dwell times up to 25 minutes (Times vary due to temperature and humidity).
    • CERAMIC’s impressive properties include; excellent heat resistance, brilliant gloss, and industry leading UV and chemical resistance.
    • FEYNLAB’s® true nano technology and bonding chemistry allows for an unparalleled level of protection. The formula penetrates further into the existing paint structure than anything else available.
  • FEYNLAB® CERAMIC LITE is an easy to use, durable, slick, hydrophobic paint coating that will provide a high level of gloss to enhance any paint. It is extremely simple to apply with superb durability proven by 60,000+ real world client vehicle installations.

    FEYNLAB® CERAMIC LITE is the legacy technology of our chief FEYNLAB® scientist. He created the first ceramic coating over a decade ago. That coating has been continually improved and is now available to the market exclusively as FEYNLAB® CERAMIC LITE.

    Ceramic Lite is classified as our entry level coating due its extreme user friendly application method. ‘Lite’ designates the coating contains a lower solids content than our traditional offerings. However it still packs quite a punch in the durability and performance departments.

    FEYNLAB engineers, manufacturers, bottles, and ships all products in-house. Therefore, we can offer a consumer grade product at a reasonable cost since we have cut out the price inflation of the traditional two and three tier distribution models.

     

  • FEYNLAB® CERAMIC NANO SEALANT is a simple to use, super glossy, extremely hydrophobic, highly durable, and UV protective ceramic ‘sealant’ for all exterior vehicle surfaces. In addition to outstanding durability and performance, CERAMIC NANO SEALANT adds a brilliant shine and richness to painted and plastic surfaces. This simple wipe on / wipe off formula, makes CERAMIC NANO SEALANT perfect protection for all vehicles.

    Product Benefits:

    • Safe on all exterior vehicle surfaces: painted, plastic, wheels, even glass (windscreen not recommended)
    • Adds a deep gloss and richness and to painted and plastic exterior surfaces.
    • A super hydrophobic which causes water to sheet off and inhibits dirt & contamination surface bonding.
    • Extremely Simple and Quick Wipe on, Wipe off application method.
    • Perfect complimentary protection layer for any ceramic coated vehicle, no matter the brand.
    • Durable stand-alone ‘sealant’ type of product with a minimum durability of 6 months .
    • When applied to wheels, greatly reduces cleaning time and effort — stay cleaner for longer.

    Durability & Application Surfaces:
    Durability – 6 months.

    APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

    • Clear-coated painted surfaces
    • Black textured plastics
    • Headlights & Tail-lights
    • Black piano trim
    • Clear-coated painted wheel rims & calipers

    Included:
    A 120ml Bottle.

    Paint Preparation:
    Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME.

    Directions:

    • Place vehicle in a well lit, cool, and contamination free environment out of direct sunlight.
    • Thoroughly rinse vehicle of all loose dust, debris, and topical contamination — when possible.
    • Clean all exterior vehicle surfaces with a PURE WASH for a traditional wash, or with PURE RINSELESS for a waterless or rinseless wash.

    Application Instructions:

    1. Using a clean microfiber towel, apply CERAMIC NANO SEALANT to the working section.
    2. Spread evenly over the surface. Amount of product should be enough to evenly coat the area without over saturation.
    3. After applying, allow CERAMIC NANO SEALANT a dwell time of 3-4 min.
    4. After 4min, buff the area clear with another clean microfiber towel.

    Recommended Maximum Area of Application:
    HALF of a door or 1/4 of a hood, then wipe off in same pattern as application.

    Final Inspection:
    Carefully inspect all finished panels for leftover residue during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. Product residue is much easier to remove if caught soon after final wipe than later on.

  • CERAMIC PLUS maintains the thickness and protection aspect of CERAMIC, while incorporating 40% of self healing capabilities for light surface scratches and micro marring. While some deeper scratches, which may not completely recover, but they will be much noticeable and almost undetectable on lighter colored paints.

    Additionally, Ceramic Plus still provides similar heat resistance, high gloss, hydrophobic and easy cleaning properties which Ceramic is known for.

    CERAMIC PLUS is only for professional use by FEYNLAB™ Approved and Accredited installers. Do not attempt to apply this product without training.

  • FEYNLAB® CERAMIC WHEEL AND CALIPER

    FEYNLAB® CERAMIC WHEEL AND CALIPER was developed to protect from harsh conditions of vehicle wheels and turn wheel cleaning into easy mode!. This THICK & Durable ceramic nano coating invites extreme conditions because it was designed for high temperatures and a constant barrage of intense contamination.

    CERAMIC WHEEL AND CALIPER Benefits:
    With an extremely high solids content (70%), FEYNLAB® CERAMIC WHEEL AND CALIPER will stand up to the daily beating delivered by road contamination and brake dust.

    FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

    Durability & Application Surfaces:
    Durability: 1 Year

    Application includes 1 component layer, reaching an overall film build between 1-2 microns.

    APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

    • Clear-coated painted wheel rims & calipers
    • Chrome surfaces

    Shelf Life:
    Unopened – 1 year. Opened – Use within 7 days.

    Included:
    30ml (1oz) FEYNLAB® CERAMIC WHEEL & CALIPER

    Cautions:
    Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

    Paint Preparation:
    Thoroughly clean wheels & calipers using FEYNLAB® PURE WASH vehicle to remove all topical contamination. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After cleaning and polishing to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

    Directions:
    Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber sponge applicators, 1 foam applicator on hand BEFORE application.

    Shake WHEEL & CALIPER vigorously for 2 min before use. Open the bottle and allow the coating 1min of air exposure.

    CERAMIC WHEEL AND CALIPER – Application Instructions:

    • Apply a small amount of CERAMIC WHEEL & CALIPER to a microfiber applicator and spread evenly over the wheels or calipers. The amount of product should be enough to evenly coat the area without over saturation.
    • Allow CERAMIC WHEEL & CALIPER to dwell for 30-35min. Dwell times over 45 min may require MUCH more removal effort.
    • After application is complete, remove coating in same pattern as application with a Microfiber towel.

    Recommended Maximum Area of Application:
    Coat 2 full wheels, or 4 wheel faces then wipe off, following the same pattern as application.

    Best Practice: Combine WHEEL & CALIPER with TOPCOAT. This powerful combination provides wheels with: durable protection, extraordinary hydrophobic and self cleaning traits, and incredible ease of maintenance.

    Final Inspection:
    Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

    Layering:
    Although one layer of CERAMIC WHEEL AND CALIPER is sufficient to achieve the 1 year durability on clear-coated painted surfaces, another coat may be applied to any area to gain additional thickness.

    To layer CERAMIC WHEEL & CALIPER, wait at least an hour after final wipe off of first layer. For best results and performance wait 1-3 hours between second later. Do NOT layer after 3 hours.

    Infrared Curing (Required):
    Bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel.

    Post Application Instructions:

    • Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
    • Avoid all chemicals including car washes for 7 days.
    • If the vehicle must be released in wet conditions before 24hrs after the final coating, then apply FEYNLAB® DETAILER after 2-4 hours of curing time.
    • Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.

    Climate Notes:
    All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.

    Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle.

    Coatings are best applied in temperature controlled environments of  10°C-30°C (50°F-85°F), with humidity as low as possible.

  • FEYNLAB® HEAL LITE is the solution for hard to maintain dark colored automotive vehicles. With HEAL LITE, washed induced love marks and other light scratches will quickly vanish when the panel is heated by the sun.

  • FEYNLAB® LEATHER TREATMENT is a natural conditioning treatment to hydrate leather, preserving its supple feel and elastic qualities without a greasy feel or appearance.

    Traditional leather treatments are typically oil based and attract dust, creating a quick re-soiling environment. LEATHER TREATMENT is a water and vegetable based formula, working to deeply condition without leaving a greasy feel and is safe for all leather types, from urethane coated to untreated Aniline or Semi-Aniline Leather.

    Included
    120ml or 500ml Bottle.

    Surface Preparation
    Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness.

    Clean leather thoroughly, removing as much dirt as possible from the surface. Steam, is often the most effective method of cleaning leather as it helps remove contamination deep within the leather’s pores. Bonnet style cleaning (filtering steam through a bonnet attachment or towel) is recommended with steam to avoid over saturating or overheating surfaces.

    If using cleaning products, ensure they are leather safe. After the use of cleaning products perform a simple and thorough water wipe down or all to ensure any residue from the cleaning products is removed.

    Directions

    1. Apply FEYNLAB® LEATHER TREATMENT using a microfiber applicator or towel.
    2. Use enough product to generously cover the working area, spreading evenly over the surface.
    3. Once Applied, allow the product a couple min to absorb into the leather. Blend any excess with a towel.
  • FEYNLAB® LEATHER TREATMENT is a natural conditioning treatment to hydrate leather, preserving its supple feel and elastic qualities without a greasy feel or appearance.

    Traditional leather treatments are typically oil based and attract dust, creating a quick re-soiling environment. LEATHER TREATMENT is a water and vegetable based formula, working to deeply condition without leaving a greasy feel and is safe for all leather types, from urethane coated to untreated Aniline or Semi-Aniline Leather.

    Included
    120ml or 500ml Bottle.

    Surface Preparation
    Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness.

    Clean leather thoroughly, removing as much dirt as possible from the surface. Steam, is often the most effective method of cleaning leather as it helps remove contamination deep within the leather’s pores. Bonnet style cleaning (filtering steam through a bonnet attachment or towel) is recommended with steam to avoid over saturating or overheating surfaces.

    If using cleaning products, ensure they are leather safe. After the use of cleaning products perform a simple and thorough water wipe down or all to ensure any residue from the cleaning products is removed.

    Directions

    1. Apply FEYNLAB® LEATHER TREATMENT using a microfiber applicator or towel.
    2. Use enough product to generously cover the working area, spreading evenly over the surface.
    3. Once Applied, allow the product a couple min to absorb into the leather. Blend any excess with a towel.
  • FEYNLAB® LEVELING AID

    FEYNLAB® LEVELING AID assists in the final wiping process (leveling) of more complicated coating installations; such as Ceramic Plus and Heal Lite. Different protection aspects of coatings in the FEYNLAB™ family require more in-depth procedures. LEVELING AID is the final step, allowing for optimal film build and adhesion to painted surfaces. It’s main purpose is to reinforce bonding as the final step, leaving the surface with a clear appearance.

    LEVELING AID also works well in the removal of other coating technology outside of the FEYNLAB chemistry family.

    Product Benefits:
    FEYNLAB® LEVELING AID, promotes adhesion, film build, and is the final step to buffing the surface clear for FEYNLAB® coatings such as Ceramic Plus and Heal Lite.

    FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.

    Included:
    120ml Bottle FEYNLAB® LEVELING AID

    Cautions:
    Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

    Paint Preparation:
    Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating.

    LEVELING AID Application Directions:
    LEVELING AID is used to assist in the removal of specific FEYNLAB® coatings, once coatings have been applied and cured about 75%.

    Using a clean microfiber towel, first apply 3-5 sprays of LEVELING AID to the towel. Then, for each section the size of half a door or a quarter of a hood, apply 3-4 more to the towel then spread evenly over the surface. The amount of product should be enough to evenly coat the area without over saturation. LEVELING AID may also be applied via MF applicator pad.

    After applying, flip the towel over and buff the area clear or use another dedicated clean microfiber towel to buff clear.

    ALWAYS keep cap on bottle when not in use.

    Recommended Maximum Area of Application:
    HALF of a door or 1/4 of a hood, then wipe off in same pattern as application.

    Final Inspection:
    Carefully inspect all finished panels for leftover coating residue (high spots) before moving on to the rest of the car. Commonly edges, emblems and tight spaces tend to hold remaining product. High spots are much easier to remove if you catch within a 20-40 min window after final wipe than later on.

    Post Application Instructions

    • Avoid any incidental water exposure for 24 hours.
    • Avoid all chemicals including car washes for 7 days.
    • Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER

    Climate Notes

    All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating.

    If possible apply coating in temperature controlled environment 10°C-30°C (50°F-85°F), with humidity as low as possible.

  • FEYNLAB® PLASTIC transforms faded dull exterior trim back into a deep rich looking finish. PLASTIC grants a new chemical structure which adds UV protection from future fading.

    Once PLASTIC is Fully Cured, it is recommended to top with Topcoat for extra protection and hydrophobics.

    Durability & Application Surfaces:
    Durability – 1 yr.

    Application includes 1 component layer, reaching an overall film build between 1-2 microns.

    APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

    • Exterior textured plastics
    • Exterior plastic bumpers

    Shelf Life:
    Unopened  – 1 year.   Opened – Use within 7 days. ALWAYS keep cap on bottle when not in use.

    Included:
    30ml (1oz) FEYNLAB® PLASTIC

    Cautions:
    Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

    Surface Preparation:
    Thoroughly clean vehicle using FEYNLAB® PURE WASH vehicle to remove all topical contamination. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME.

    Directions:
    Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination
    free environment.

    Shake PLASTIC vigorously for 1 min before use.

    Application Instructions:

    • Using the microfiber applicator, apply a small amount of PLASTIC and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
    • Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
    • After 5 min, go back to starting place and wipe any excess product to even out surface.

    Note: The amount of product required will vary based upon the overall composition of the plastic trim type and the starting condition. More oxidized faded trim may require more product for restoration. For extremely faded plastic use FEYNLAB®PLASTIC BLACK.

    Final Inspection:
    Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

    Post Application Instructions:

    • HIGHLY RECOMMENDED: Cure surfaces in the sun right after application as long as possible.
    • Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
    • Avoid all chemicals including car washes for 7 days.

    Climate Notes:
    All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 80% or higher then consider lessening the recommended dwell and wipe times for the coating.

    If possible apply coating in temperature controlled environment 10°C-30°C (50°F-85°F), with humidity as low as possible.

  • FEYNLAB® PLASTIC BLACK address the specific needs of severely faded exterior vehicle trim by incorporating black pigmentation into the PLASTIC formula. PLASTIC BLACK reformulates the original faded plastic in order to restore and protect it. Additionally, PLASTIC BLACK has a slightly glossier finish than PLASTIC.

    Once Plastic Black is Fully Cured, it is recommended to top with TOPCOAT for extra protection and hydrophobics.

    Durability & Application Surfaces

    Durability – 1 yr.

    Application includes 1 component layer, reaching an overall film build between 1-2 microns.

    APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces

    • Black textured plastics
    • Black plastic bumpers

    Shelf Life:
    Unopened  – 1 year.   Opened – Use within 7 days. ALWAYS keep cap on bottle when not in use.

    Included:
    30ml (1oz) FEYNLAB® PLASTIC BLACK

    Cautions:
    Always wear respirator & gloves during application. Ensure application area is free of loose contamination.

    Surface Preparation:
    Thoroughly clean vehicle using FEYNLAB® PURE WASH vehicle to remove all topical contamination.

    Directions:
    Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment.

    Shake PLASTIC BLACK vigorously for 1 min before use.

    Application Instructions:

    • Using the microfiber applicator, apply a small amount of PLASTIC BLACK and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
    • Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
    • After 5 min, go back to starting place and wipe any excess product to even out surface.

    Note: The amount of PLASTIC BLACK required will vary based upon the overall type of plastic and the starting condition. More oxidized faded plastics may require more product or multiple applications.

    Final Inspection:
    Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started.

    Post Application Instructions:

    • HIGHLY RECOMMENDED: Cure surface in the sun right after application as long as possible.
    • Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
    • Avoid all chemicals including car washes for 7 days.

    Climate Notes

    All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 80% or higher then consider lessening the recommended dwell and wipe times for the coating.

    If possible apply coating in temperature controlled environment 10°C-30°C (50°F-85°F), with humidity as low as possible.

Showing 1–16 of 23 results

Need Finance? Apply Now

THIS PRODUCT CAN BE FINANCED

Filter by price

Shopping Cart