-
FEYNLAB® CERAMIC LITE is an easy to use, durable, slick, hydrophobic paint coating that will provide a high level of gloss to enhance any paint. It is extremely simple to apply with superb durability proven by 60,000+ real world client vehicle installations.
-
PRIME is the second step in the FEYNLAB optimal bonding system. After using FEYNLAB® PURE WASH (step 1) to clean the surface, PRIME is used as the decontamination or ‘clay bar’ lubricant. The name is born from its function. Think of PRIME as a way of filling in the micro voids of the paint structure with a more stable base for a coating to adhere to. This increased surface area and chemical bonding allows all FEYNLAB® coatings unrivaled adhesion to the painted surface. This step also helps enhance overall coating durability and performance. PRIME Benefits:
- True nano technology allows PRIME to cleanse paint deep inside the paint’s pores.
- Prime lays down base chemistry within the porous paint structure, enhancing the bonding of coating applications.
- FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
-
FEYNLAB® PANEL PREP is a deep cleaning final step to paint correction. Affectionately known as “Paint Correction Truth Serum.” It removes all polish residue, oils, and dust from all exterior vehicle surfaces revealing the true state of the surface. After a thorough wipe down with Panel Prep, the true condition of polished surfaces are revealed and ready for final inspection before ceramic coating or other topical protection application. Traditional Alcohol based cleaners only remove light oils, leaving behind heavier oils based in petroleum. PANEL PREP is engineered to bond to both the light and heavy oils assisting in their complete removal while also breaking them down. Product Benefits:
- PANEL PREP easily removes all surface oils or filling agents, revealing the true state of a surface.
- Use of Panel Prep cleans surfaces completely, ensuring optimal bonding of FEYNLAB® or any coating.
- Also works as an excellent streak free glass cleaner
- Body shop safe – 100% silicone free
-
CERAMIC PLUS maintains the thickness and protection aspect of CERAMIC, while incorporating 40% of self healing capabilities for light surface scratches and micro marring. While some deeper scratches, which may not completely recover, but they will be much noticeable and almost undetectable on lighter colored paints. Additionally, Ceramic Plus still provides similar heat resistance, high gloss, hydrophobic and easy cleaning properties which Ceramic is known for. CERAMIC PLUS is only for professional use by FEYNLAB™ Approved and Accredited installers. Do not attempt to apply this product without training.
-
Sale!Detailer – A super hydrophobic, durable, slick, glossy, spray-on and wipe-off maintenance spray, drying aid, and sealant. Protects coatings from water spotting during the curing process.FEYNLAB® DETAILER is more than a 21st century ‘quick detailing spray.’ Utilizing FEYNLAB’s® true nano technology, DETAILER contains water-based polymeric cleaning agents which clings to light layers of dust and contaminants, removing them thoroughly. DETAILER adds a durable layer of significant hydrophobic & ‘self cleaning’ properties and additional gloss to vehicle exterior surfaces. DETAILER is an ideal product to protect ALL coatings on the market from water spotting during the curing process. Product Benefits
- A durable ‘spray sealant’ which doubles as a traditional quick detailing product.
- Use as stand-alone protection or to top automotive ceramic nano coating hydrophobic properties.
- An Excellent spot cleaner or drying aid after washing vehicle surfaces.
- Safe for all vehicle exterior surfaces: paint, plastic, vinyl, rubber, etc.
- Completely water based, Detailer is completely Body Shop safe – silicone free.
- Perfect final step product to protect all coatings from water spotting during curing.
- Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
- Black textured plastics
- Headlights & Tail-lights
- Black piano trim
- Clear-coated painted wheel rims & calipers
- Place vehicle in a well lit, cool, & contamination free environment.
- Thoroughly rinse vehicle of all loose dust, debris, and topical contamination.
- Clean all exterior vehicle surfaces with a PURE WASH for a traditional wash, or with PURE RINSELESS for a waterless or rinseless wash methods.
- Using a clean microfiber towel, apply DETAILER to the towel. Prime the towel with 3-5 sprays.
- For each section, the size of half a door or a quarter of a hood, apply 3-4 additional sprays to the towel.
- Spread evenly over the surface. Amount of product should be enough to evenly coat the area without over saturation.
- After applying, immediately, buff the area clear with another clean microfiber towel.
-
FEYNLAB® TOPCOAT is far and away the slickest and most hydrophobic coating in the Feynlab family. Its sole purpose is to add great water sheeting and self cleaning properties to any of our ceramic coatings. In addition, the super low free surface energy of TOPCOAT causes the surface to feel silky smooth to the touch. Product Benefits TOPCOAT keeps exterior vehicle surfaces cleaner for longer due to its superior hydrophobic and self-cleaning properties. This means vehicles will remain cleaner over time and, when washing, water and contamination will release from the surface with great ease. FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Durability & Application Surfaces Durability – 1 year. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
- Black textured plastics
- Headlights & Tail-lights
- Black piano trim
- Clear-coated painted wheel rims & calipers
- Apply enough TOPCOAT to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
- Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
- Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
- TOPCOAT should be applied to only one panel, or half a panel at a time if it is larger.
- Immediately wipe off TOPCOAT following same pattern of application, using a clean microfiber towel.
- If the surface is difficult to buff clear (hazy) reduce the application area.
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
-
FEYNLAB® PPF & VINYL CERAMIC
FEYNLAB® PPF & VINYL CERAMIC coating is specifically designed to protect the porous surface of Vinyl or Self Healing Paint Protection Films (PPF). Originally engineered for water spot protection, the high surface tension (hydrophobic properties) of PPF & VINYL helps keep surfaces cleaner for longer. Additionally, PPF & VINYL enhances the gloss to standard PPF while allowing matte Vinyl and PPF to retain their dulled appearance. Product Benefits PPF & VINYL is engineered specifically to enhance self healing top coat Paint Protection Films by adding water spot protection.- Increased UVA and UVB ray protection.
- Impressive hydrophobic and self cleaning properties and ease of maintenance on Vinyl and PPF finishes.
- Enhances gloss on appropriate finish types, while leaving both matte Vinyl & PPF surfaces with a dulled appearance.
- FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
- Vinyl & Vinyl Wrapped Surfaces
- Paint Protection Film (a.k.a. PPF or Clear Bra)
- Apply enough PPF & VINYL to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
- Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
- Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
- After application, step back and look for any areas missed or those with excess product. If found, smooth out evenly with the applicator sponge. This will ensure even drying across the panel and minimize excess product usage.
- Allow PPF & VINYL to dwell on the panel a minimum of 15-20 min, until it is about 75% dry. Dwell time may vary depending on humidity and temperature. * Humid Climates 75%+ = Shorter Dwell time.
- To test removal readiness: lightly swipe a small spot with a gloved finger and looking for a clean swipe. If the swipe reveals a clean trail then remove, if the swipe smears then allow it to dwell longer. Repeat swipe test again in 2-5 min increments to determine wipe times.
- Wipe off PPF & VINYL following same pattern of application, using a clean microfiber towel.
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER
-
FEYNLAB® PLASTIC transforms faded dull exterior trim back into a deep rich looking finish. PLASTIC grants a new chemical structure which adds UV protection from future fading. Once PLASTIC is Fully Cured, it is recommended to top with Topcoat for extra protection and hydrophobics. Durability & Application Surfaces: Durability – 1 yr. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Exterior textured plastics
- Exterior plastic bumpers
- Using the microfiber applicator, apply a small amount of PLASTIC and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
- Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
- After 5 min, go back to starting place and wipe any excess product to even out surface.
- HIGHLY RECOMMENDED: Cure surfaces in the sun right after application as long as possible.
- Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
-
FEYNLAB® PLASTIC BLACK address the specific needs of severely faded exterior vehicle trim by incorporating black pigmentation into the PLASTIC formula. PLASTIC BLACK reformulates the original faded plastic in order to restore and protect it. Additionally, PLASTIC BLACK has a slightly glossier finish than PLASTIC. Once Plastic Black is Fully Cured, it is recommended to top with TOPCOAT for extra protection and hydrophobics. Durability & Application Surfaces Durability – 1 yr. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Black textured plastics
- Black plastic bumpers
- Using the microfiber applicator, apply a small amount of PLASTIC BLACK and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
- Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
- After 5 min, go back to starting place and wipe any excess product to even out surface.
- HIGHLY RECOMMENDED: Cure surface in the sun right after application as long as possible.
- Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
-
FEYNLAB® LEATHER TREATMENT is a natural conditioning treatment to hydrate leather, preserving its supple feel and elastic qualities without a greasy feel or appearance. Traditional leather treatments are typically oil based and attract dust, creating a quick re-soiling environment. LEATHER TREATMENT is a water and vegetable based formula, working to deeply condition without leaving a greasy feel and is safe for all leather types, from urethane coated to untreated Aniline or Semi-Aniline Leather. Included 120ml or 500ml Bottle. Surface Preparation Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness. Clean leather thoroughly, removing as much dirt as possible from the surface. Steam, is often the most effective method of cleaning leather as it helps remove contamination deep within the leather’s pores. Bonnet style cleaning (filtering steam through a bonnet attachment or towel) is recommended with steam to avoid over saturating or overheating surfaces. If using cleaning products, ensure they are leather safe. After the use of cleaning products perform a simple and thorough water wipe down or all to ensure any residue from the cleaning products is removed. Directions
- Apply FEYNLAB® LEATHER TREATMENT using a microfiber applicator or towel.
- Use enough product to generously cover the working area, spreading evenly over the surface.
- Once Applied, allow the product a couple min to absorb into the leather. Blend any excess with a towel.
-
FEYNLAB® TEXTILE
FEYNLAB® TEXTILE is a water based coating engineered for extreme durability and hydrophobicity on cloth surfaces. TEXTILE is versatile and designed for interior cloth seats, carpets, and convertible fabric tops. Once treated, surfaces are simple to clean and protected against accidental spills and stains of all kinds, including common oils. The water based formula allows for little to no odor after drying 12-16 hours. Product Benefits:- Interior Fabric Protection against water spills and staining from extreme weather, children, or pets.
- Durable protection for a minimum of 6-12 months from regular wear and caustic cleaners.
- Surfaces treated with Textile become simple to clean, saving time and money on products.
- Provides UV protection of convertible tops or dashboard covers,
- Versatile for interior cloth surfaces, convertible tops, and may be used on shoes or hats.
- Spray directly onto cloth seats, floors, mats, or convertible tops, saturating the surface.
- Using nitrile or latex gloves, work the product into the surface.
- Follow up with a light misting of Textile over the surface. This technique ensures all fibers are coated on all sides.
- Using a hair dryer, on a heat setting that won’t singe your arm, thoroughly dry the applied areas. Don’t place heat too close to the surface.
- Allow treated areas to cure in a well ventilated area, for a minimum of 12-16 hours, preferably 24hrs.
-
FEYNLAB® LEVELING AID
FEYNLAB® LEVELING AID assists in the final wiping process (leveling) of more complicated coating installations; such as Ceramic Plus and Heal Lite. Different protection aspects of coatings in the FEYNLAB™ family require more in-depth procedures. LEVELING AID is the final step, allowing for optimal film build and adhesion to painted surfaces. It’s main purpose is to reinforce bonding as the final step, leaving the surface with a clear appearance. LEVELING AID also works well in the removal of other coating technology outside of the FEYNLAB chemistry family. Product Benefits: FEYNLAB® LEVELING AID, promotes adhesion, film build, and is the final step to buffing the surface clear for FEYNLAB® coatings such as Ceramic Plus and Heal Lite. FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Included: 120ml Bottle FEYNLAB® LEVELING AID Cautions: Always wear respirator & gloves during application. Ensure application area is free of loose contamination. Paint Preparation: Thoroughly clean vehicle using FEYNLAB® PURE WASH. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After polishing paint to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating. LEVELING AID Application Directions: LEVELING AID is used to assist in the removal of specific FEYNLAB® coatings, once coatings have been applied and cured about 75%. Using a clean microfiber towel, first apply 3-5 sprays of LEVELING AID to the towel. Then, for each section the size of half a door or a quarter of a hood, apply 3-4 more to the towel then spread evenly over the surface. The amount of product should be enough to evenly coat the area without over saturation. LEVELING AID may also be applied via MF applicator pad. After applying, flip the towel over and buff the area clear or use another dedicated clean microfiber towel to buff clear. ALWAYS keep cap on bottle when not in use. Recommended Maximum Area of Application: HALF of a door or 1/4 of a hood, then wipe off in same pattern as application. Final Inspection: Carefully inspect all finished panels for leftover coating residue (high spots) before moving on to the rest of the car. Commonly edges, emblems and tight spaces tend to hold remaining product. High spots are much easier to remove if you catch within a 20-40 min window after final wipe than later on. Post Application Instructions- Avoid any incidental water exposure for 24 hours.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER
