-
FEYNLAB® CERAMIC LITE is an easy to use, durable, slick, hydrophobic paint coating that will provide a high level of gloss to enhance any paint. It is extremely simple to apply with superb durability proven by 60,000+ real world client vehicle installations.
-
- Strengthens and restores water repellency
- Greatly increases stain resistance
- Maintains colorfastness
- Keeps fabrics soft and breathable
- Safe for synthetic and natural fibers
Usage Directions:
Product liquid and spray are flammable, keep product and treated article (until dry) away from heat, sparks or open flames. Do not smoke when applying 303® Fabric Guard. Spray until evenly wet, overlapping sprayed areas. NOTE: Reduced coverage when applied with paint roller or brush. Apply to fabric above 70°F/21°C. (For quicker drying/curing and best results, apply in full sun.) Treated material must be protected from rain/dew until completely cured. CURING: 12-24 hours dependent on temperature. If these steps are performed correctly, the material will be water repellent at this point. 303® Fabric Guard will need reapplication depending on fabric exposure to sunlight and weather conditions; pour water on fabric to determine need to retreat fabric. COVERAGE: 40-75 sq. ft. (30 x 60cm) depending on material and application method.Example Use Cases
Patio Cushion
- Untreated: Cushions are stained and water soaks into the fabric..
- Treated with 303 Fabric Guard: Water and soil repel from the fabric, prolonging its life.
Umbrella
- Untreated: The umbrella is stained from outdoor elements and rain.
- Treated with 303 Fabric Guard: Water and soil repel from the fabric and it is protected from outdoor elements.
-
FEYNLAB® LEATHER TREATMENT is a natural conditioning treatment to hydrate leather, preserving its supple feel and elastic qualities without a greasy feel or appearance. Traditional leather treatments are typically oil based and attract dust, creating a quick re-soiling environment. LEATHER TREATMENT is a water and vegetable based formula, working to deeply condition without leaving a greasy feel and is safe for all leather types, from urethane coated to untreated Aniline or Semi-Aniline Leather. Included 120ml or 500ml Bottle. Surface Preparation Thoroughly clean surface of loose contamination or topical that might inhibit product effectiveness. Clean leather thoroughly, removing as much dirt as possible from the surface. Steam, is often the most effective method of cleaning leather as it helps remove contamination deep within the leather’s pores. Bonnet style cleaning (filtering steam through a bonnet attachment or towel) is recommended with steam to avoid over saturating or overheating surfaces. If using cleaning products, ensure they are leather safe. After the use of cleaning products perform a simple and thorough water wipe down or all to ensure any residue from the cleaning products is removed. Directions
- Apply FEYNLAB® LEATHER TREATMENT using a microfiber applicator or towel.
- Use enough product to generously cover the working area, spreading evenly over the surface.
- Once Applied, allow the product a couple min to absorb into the leather. Blend any excess with a towel.
-
FEYNLAB® TEXTILE
FEYNLAB® TEXTILE is a water based coating engineered for extreme durability and hydrophobicity on cloth surfaces. TEXTILE is versatile and designed for interior cloth seats, carpets, and convertible fabric tops. Once treated, surfaces are simple to clean and protected against accidental spills and stains of all kinds, including common oils. The water based formula allows for little to no odor after drying 12-16 hours. Product Benefits:- Interior Fabric Protection against water spills and staining from extreme weather, children, or pets.
- Durable protection for a minimum of 6-12 months from regular wear and caustic cleaners.
- Surfaces treated with Textile become simple to clean, saving time and money on products.
- Provides UV protection of convertible tops or dashboard covers,
- Versatile for interior cloth surfaces, convertible tops, and may be used on shoes or hats.
- Spray directly onto cloth seats, floors, mats, or convertible tops, saturating the surface.
- Using nitrile or latex gloves, work the product into the surface.
- Follow up with a light misting of Textile over the surface. This technique ensures all fibers are coated on all sides.
- Using a hair dryer, on a heat setting that won’t singe your arm, thoroughly dry the applied areas. Don’t place heat too close to the surface.
- Allow treated areas to cure in a well ventilated area, for a minimum of 12-16 hours, preferably 24hrs.
-
FEYNLAB CERAMIC v3 is our highest solids version of CERAMIC that forms a lattice structure of silica, silicon-nitride and silicon-carbide. This gives CERAMIC v3 enhanced surface strength, exceptional gloss, UV protection, and chemical resistance. CERAMIC v3 is an upgrade from v2, providing and easier installation, improved hydrophobics, and an amazing self-cleaning ability to keep your vehicle looking better between washes. IMPORTANT NOTE: DO NOT use Overcoat v2 with this product. Overcoat v2 will interfere with the superior hydrophobics of Ceramic v3.
-
FEYNLAB® CERAMIC WHEEL AND CALIPER
FEYNLAB® CERAMIC WHEEL AND CALIPER was developed to protect from harsh conditions of vehicle wheels and turn wheel cleaning into easy mode!. This THICK & Durable ceramic nano coating invites extreme conditions because it was designed for high temperatures and a constant barrage of intense contamination. CERAMIC WHEEL AND CALIPER Benefits: With an extremely high solids content (70%), FEYNLAB® CERAMIC WHEEL AND CALIPER will stand up to the daily beating delivered by road contamination and brake dust. FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Durability & Application Surfaces: Durability: 1 Year Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces- Clear-coated painted wheel rims & calipers
- Chrome surfaces
- Apply a small amount of CERAMIC WHEEL & CALIPER to a microfiber applicator and spread evenly over the wheels or calipers. The amount of product should be enough to evenly coat the area without over saturation.
- Allow CERAMIC WHEEL & CALIPER to dwell for 30-35min. Dwell times over 45 min may require MUCH more removal effort.
- After application is complete, remove coating in same pattern as application with a Microfiber towel.
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- If the vehicle must be released in wet conditions before 24hrs after the final coating, then apply FEYNLAB® DETAILER after 2-4 hours of curing time.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
-
CUTTING EDGE TECHNOLOGY: Contains the latest advanced Hybrid SiO2 technology SEALS THE PAINT: Seals paint for long-lasting protection against the elements WATER BEADS & ROLLS OFF: Delivers an extreme water beading action EASY TO USE WAX: Applies like a traditional liquid wax NO WAX RESIDUE: Non-whitening on non-painted trim and rubber gaskets
-
FEYNLAB® PLASTIC BLACK address the specific needs of severely faded exterior vehicle trim by incorporating black pigmentation into the PLASTIC formula. PLASTIC BLACK reformulates the original faded plastic in order to restore and protect it. Additionally, PLASTIC BLACK has a slightly glossier finish than PLASTIC. Once Plastic Black is Fully Cured, it is recommended to top with TOPCOAT for extra protection and hydrophobics. Durability & Application Surfaces Durability – 1 yr. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Black textured plastics
- Black plastic bumpers
- Using the microfiber applicator, apply a small amount of PLASTIC BLACK and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
- Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
- After 5 min, go back to starting place and wipe any excess product to even out surface.
- HIGHLY RECOMMENDED: Cure surface in the sun right after application as long as possible.
- Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
-
FEYNLAB® TOPCOAT is far and away the slickest and most hydrophobic coating in the Feynlab family. Its sole purpose is to add great water sheeting and self cleaning properties to any of our ceramic coatings. In addition, the super low free surface energy of TOPCOAT causes the surface to feel silky smooth to the touch. Product Benefits TOPCOAT keeps exterior vehicle surfaces cleaner for longer due to its superior hydrophobic and self-cleaning properties. This means vehicles will remain cleaner over time and, when washing, water and contamination will release from the surface with great ease. FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Durability & Application Surfaces Durability – 1 year. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
- Black textured plastics
- Headlights & Tail-lights
- Black piano trim
- Clear-coated painted wheel rims & calipers
- Apply enough TOPCOAT to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
- Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
- Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
- TOPCOAT should be applied to only one panel, or half a panel at a time if it is larger.
- Immediately wipe off TOPCOAT following same pattern of application, using a clean microfiber towel.
- If the surface is difficult to buff clear (hazy) reduce the application area.
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
-
Ceramic Allround C0.01 is a ceramic coating which can be used on a variety of surfaces to provide long-lasting protection.
-
FEYNLAB® PLASTIC transforms faded dull exterior trim back into a deep rich looking finish. PLASTIC grants a new chemical structure which adds UV protection from future fading. Once PLASTIC is Fully Cured, it is recommended to top with Topcoat for extra protection and hydrophobics. Durability & Application Surfaces: Durability – 1 yr. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
- Exterior textured plastics
- Exterior plastic bumpers
- Using the microfiber applicator, apply a small amount of PLASTIC and work into the surface. The amount of product should be enough to evenly coat the area without over saturation.
- Allow plastic to dwell and seep in for 5 min or apply as much as needed in a 5 minute window.
- After 5 min, go back to starting place and wipe any excess product to even out surface.
- HIGHLY RECOMMENDED: Cure surfaces in the sun right after application as long as possible.
- Avoid any incidental water exposure for 4 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
-
FEYNLAB® PPF & VINYL CERAMIC
FEYNLAB® PPF & VINYL CERAMIC coating is specifically designed to protect the porous surface of Vinyl or Self Healing Paint Protection Films (PPF). Originally engineered for water spot protection, the high surface tension (hydrophobic properties) of PPF & VINYL helps keep surfaces cleaner for longer. Additionally, PPF & VINYL enhances the gloss to standard PPF while allowing matte Vinyl and PPF to retain their dulled appearance. Product Benefits PPF & VINYL is engineered specifically to enhance self healing top coat Paint Protection Films by adding water spot protection.- Increased UVA and UVB ray protection.
- Impressive hydrophobic and self cleaning properties and ease of maintenance on Vinyl and PPF finishes.
- Enhances gloss on appropriate finish types, while leaving both matte Vinyl & PPF surfaces with a dulled appearance.
- FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available.
- Vinyl & Vinyl Wrapped Surfaces
- Paint Protection Film (a.k.a. PPF or Clear Bra)
- Apply enough PPF & VINYL to a microfiber sponge applicator to fully cover a single panel such as a door or half a hood.
- Make a “+” (plus) sign with product in the middle of the panel, then wipe around the boundaries of the section creating a frame.
- Next, fill in the framed area with slightly overlapping straight lines from left to right over the whole area and then repeat now creating up and down line. This cross-hatching ensures an level application.
- After application, step back and look for any areas missed or those with excess product. If found, smooth out evenly with the applicator sponge. This will ensure even drying across the panel and minimize excess product usage.
- Allow PPF & VINYL to dwell on the panel a minimum of 15-20 min, until it is about 75% dry. Dwell time may vary depending on humidity and temperature. * Humid Climates 75%+ = Shorter Dwell time.
- To test removal readiness: lightly swipe a small spot with a gloved finger and looking for a clean swipe. If the swipe reveals a clean trail then remove, if the swipe smears then allow it to dwell longer. Repeat swipe test again in 2-5 min increments to determine wipe times.
- Wipe off PPF & VINYL following same pattern of application, using a clean microfiber towel.
- Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
- Avoid all chemicals including car washes for 7 days.
- Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER