Home/FEYNLAB COATINGS
  • Surface preparation is the most important step in the longevity and durability of any last step protection. Utilizing our proprietary smart surfactant technology, Feynlab Tire & Wheel Cleaner quickly removes the toughest browning stains, road grime, grease, oil, brake dust and even years of old silicone dressing build up from your tires. What’s left is clean even surface, ready for protection and sheen by Feynlab Tire Coating or favorite dressing. Feynlab Tire & Wheel Cleaner contains emulsifiers and deep cleaning surfactants that loosen and remove all foreign surface particles from rubber tires, immediately pulling out any embedded contamination and dressing buildup. It is safe for use on clear coated wheels that may or may not contain a ceramic coating. Do not use on bare magnesium. Follow up with Feynlab Tire Coating and Feynlab Wheel & Caliper for long term protection and shine. Product Benefits: FEYNLAB TIRE CLEANER utilizes smart surfactant technology to remove the toughest brown stains, contamination, road grime, and previously applied tire dressings. FEYNLAB TIRE CLEANER is a high alkaline product that quickly and effectively preps tires for the FEYNLAB TIRE PRO coating application Body shop safe – 100% silicone free Approved Surfaces: APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces Rubber Tires Will not damage clear coated rims Will not damage clear coated rims that have been treated with Feynlab Ceramic Wheel and Caliper NOT FOR USE As a replacement for wheel acid or other products that dissolve brake dust from rims On magnesium rims As a maintenance product for tires already treated with FEYNLAB TIRE COATING. Included: A 500ml bottle with sprayer. Cautions: It is recommended to wear gloves and a respirator during application. Directions: To ensure a good experience with the product, place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F) environment. Application Instructions: Put on protective gloves. Spray Feynlab Tire & Wheel Cleaner evenly from the bottom to the top of the tire. Allow product to dwell at least 10 seconds, then scrub tire with a stiff bristle brush until you’ve properly removed all visible debris. After scrubbing, rinse the wheel thoroughly with free flowing water.
  • FEYNLAB® CERAMIC ULTRA 30ML (1 OZ) DETAILS BENEFITS CAUTIONS DIRECTIONS FEYNLAB® CERAMIC ULTRA is our most durable non-healing ceramic coating. CERAMIC ULTRA builds on the highly successful and robust DNA of CERAMIC v2 by further enhancing the solids (nano particles and proprietary resin). CERAMIC ULTRA forms a lattice structure of silica, silicon-nitride and silicon-carbide. The flexible, but durable coating, exhibits great scratch resistance, gloss, and magnificent hydrophobicity. CERAMIC ULTRA also provides UV protection and chemical resistance (acid rain), protecting the paint from fading. CERAMIC ULTRA is only for professional use by FEYNLAB® Approved and Accredited installers. Do not attempt to apply this product without training. Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS and FEYNLAB® DETAILER Ceramic Ultra may only be applied by certified installers.
  • FEYNLAB® WINDOW COATING is an ultra-durable, extremely slick, and super hydrophobic window treatment which covalently bonds to glass. Rather than hydrogen bonds, or even weaker Van der Waals forces of attraction bonds which wear off easily, FEYNLAB® WINDOW COATING reacts with the glass forming a physical bond with it. These covalent bonds are incredibly difficult to break, which means a very durable and long-lasting coating. Product Benefits FEYNLAB® WINDOW COATING is an economical and easy to apply professional window coating with extreme durability. Certified installers can confidently offer this product to customers at an extremely competitive price with other coating brands, while equaling or surpassing performance. Feynlab focused on a glass coating treatment with ease of application, great performance, & durability. Our glass coating system consists of two steps. Step 1 is a cleaner/polish which removes surface grime, contamination, and water spots. Step 2 is a glass coating with deep anchoring film formation technology. The cleaner/polish step removes all contaminants on the glass, revealing “hydroxyls” which are the reactive sites within the glass which the coating anchors to when it condenses on the surface. Several minutes after installation, a ceramic-like membrane is formed, filling in the micro voids of the glass and covering the peaks with protection. While this process takes place at the nano scale level, the beneficial change is visually evident, increasing the ability to “see through” glass. After the application process is complete, the glass is converted from a relatively reactive surface to one that is chemically inept, stain resistant, hydrophobic, and oleophobic! WINDOW COATING is only for professional use by FEYNLAB® Approved and Accredited installers. Do not attempt to apply this product without training. Durability, Warranty & Approved Surfaces Expected durability includes many variables such as abrasion to the surface and chemical exposure. However, expect six (6) months to a year on the windscreen and two (2) or more years on the side glass and rear window. Application process includes glass polishing and at least one layer of Feynlab® Window Coating. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces Glass ONLY Included 50 ml of Window Cleaner Polish 10 ml of Window Coating –sufficient to coat one vehicle (all windows) Instructions are made available to certified installers
  • FEYNLAB® PURE WASH 1L

    R410.00 incl VAT
    FEYNLAB® PURE WASH is an impressive deep cleaning car wash soap! IDEAL for the Preparation & Maintenance of Ceramic Coatings because NOTHING is left behind on the surface. Engineered with great foaming and contamination encapsulation technology, PURE WASH’S true power lies within Feynlab’s Intelligent Cleaning Technology which mechanically latches onto contamination particles for ease of removal while also chemically breaking them down. PURE WASH is a perfect preparation step for regular vehicle maintenance washes, or the application of ceramic nano coatings. PURE WASH is the natural choice to deeply clean surfaces, maintaining the optimal sheeting and self cleaning characteristics of any coated vehicle (all brands). Most car shampoos leave behind considerable polymers which interfere with a coating’s true water behavior. When used as Step 1, within the FEYLNAB Optimal Bonding System for Coatings, PURE WASH functions as a true deep cleanser. The nano particles penetrate below the surface removing deep embedded contaminants from the surface with much greater effectiveness than traditional car shampoos. This is step 1 in promoting more effective bonding and performance of ceramic nano coatings. Product Benefits: Great for use in a Foam Cannon/Lance or with Traditional Wash Buckets Attaches and Dissolves Contamination with Foaming and Encapsulation Technology to offer a Truly Deep Cleaning Car Shampoo Safe for all Vehicle Exterior Surfaces: Paint, Plastic, Rubber, Carbon Fiber, Carbon Ceramic Brakes, Anodized Aluminum, Etc. Perfect Auto Wash to Maintain Optimal Sheeting and Self Cleaning (Hydrophobic) Properties for all Ceramic Coated Surfaces Rinses Clean: Leaving Zero Residue Behind, Revealing only the True State of the Surface Ideal Preparation Wash for all Vehicle Surfaces Prior to Ceramic Coating Application Intelligent Cleaning Technology: No Fillers, Junk Chemicals, Builders, or Caustic Residue Left Behind. Included: 1L Bottle of Concentrate. Dilution Ratio: Foam Cannon: (max dilution): mix 1oz (30ml) of FEYNLAB® PURE WASH into a 32oz (1L) container. Traditional Bucket: mix 1oz (30ml) of FEYNLAB® PURE WASH to every 2 or 3 gallons (7.5 or 11L) of water. Cautions: Pure Wash is a deep cleanser and may remove less durable waxes, sealants, and topical protection. Directions: Place vehicle in a well lit, cool, contamination free environment out of direct sunlight. Thoroughly Rinse vehicle of all loose dust and topical contamination. Apply a generous amount to vehicle surfaces via foam cannon, foaming trigger bottle, or foamy wash mitt. Using a gentle wash mitt, gently and thoroughly clean the vehicle from top to bottom. Remember to clean the wash mitt after every 2-3 sections. If using one wash mitt, its advised to wash the lower 1/3 of the vehicle last, since the heaviest contaminants collect here. Rinse the vehicle thoroughly, from top to bottom, removing all excess PURE WASH from the surface. Dry vehicle with absorbent Microfiber towels, using compressed air or an air blower for surfaces, crevices, or badges.
  • FEYNLAB® PURE RINSELESS

    FEYNLAB® PURE RINSELESS is a highly concentrated rinseless or waterless car wash solution designed for regular maintenance washing of all automotive exterior vehicle surfaces– coated and non-coated alike. Regular use of PURE RINSELESS will maintain optimal sheeting and self cleaning properties of all paint coatings, sealants, and surfaces. PURE RINSELESS is also the ideal pre-coating paint cleanser, since its only purpose is to deep clean, leaving nothing behind to interfere with bonding. PURE RINSELESS fully encapsulates surface contamination particles with great lubricity, making for a safe waterless or rinseless cleaning method. As the name implies, PURE RINSELESS works to leave the surface simply clean, employing the same Intelligent Cleaning Technology as FEYNLAB® PURE WASH. The sufactants physically latch onto contamination for ease of removal while also chemically breaking them down. The formula contains no polymers, fillers, junk, or caustic chemicals  to be left behind. Instead a truly clean surface is revealed after washing, ready for the next protection step or just a fun drive. PURE RINSELESS may be mixed for both Waterless and Rinseless Car Wash Dilutions. The Deep Cleaning Refreshes Optimal Sheeting and Self Cleaning (Hydrophobic) Properties for all Ceramic Nano Coatings. When used within the FEYLNAB Optimal Bonding System for Coatings, PURE RINSELESS functions as a true deep cleanser. The nano particles penetrate deep below the surface removing embedded contaminants on and within the surface with greater effectiveness than traditional car shampoos. This is the first step in promoting more effective bonding and coating performance. PURE RINSELESS Benefits:
    • Mixed for Waterless or Rinseless Car Wash dilutions. Both solutions rinse completely clean, revealing true surface condition.
    • Superior Lubricity with Smart Surfactant & Encapsulation Technology Offering a Truly Deep Cleaning.
    • Safe for all Vehicle Exterior Surfaces: Paint, Plastic, Rubber, Vinyl, Carbon Fiber, Carbon Ceramic Brakes, Anodized Aluminum, Etc.
    • Intelligent Cleaning Technology: No Fillers, Junk Chemicals, Builders, or Caustic Residue Left Behind.
    • A Perfect wash solution for resetting the hydrophobic properties of ceramic nano coatings.
    • A Truly INCREDIBLE Microfiber Cleaning Detergent at 1oz (30ml) per washing machine load.
    Included: 1L Bottle of Concentrate. Dilution Ratio: Mix at a 1:250 dilution. 1 part Concentrate to 250 parts Water. Directions:
    • Place vehicle in a well lit, cool, contamination free environment out of direct sunlight.
    • Thoroughly Rinse vehicle of all loose dust, debris, and topical contamination — if possible.
    Waterless Car Wash Instructions:
    1. Premix waterless solution into a spray bottle or chemical sprayer.
    2. Spray a generous amount onto the surface to encapsulate all dirt and contamination particles.
    3. Use a clean long nap microfiber towel to gently remove the encapsulated contaminants from the surface.
    4. Use a secondary towel to dry the panel after washing.
    Rinseless Car Wash Dilution & Instructions:
    1. Add water to a bucket. For every gallon (3.75L) of water and add 1/2oz (15ml) of concentrate. E.G.  A 3 gallon (15L) bucket of water would require 1.5oz (45ml) of PURE RINSELESS.
    2. Spray a generous amount onto the surface to encapsulate all dirt and contamination particles.
    3. Dunk and saturate a dedicated wash mitt, before gently washing a designated working section.
    4. Finally, wipe the surface dry with a clean long nap microfiber towel to gently remove the encapsulated contaminants from the surface.
    5. Remember: After each section, clean the wash mitt to remove any contamination lifted from the vehicle surface.
  • FEYNLAB® HEAL LITE is the solution for hard to maintain dark colored automotive vehicles. With HEAL LITE, washed induced love marks and other light scratches will quickly vanish when the panel is heated by the sun.
  • FEYNLAB® SELF HEAL PLUS

    FEYNLAB® HEAL PLUS is the optimal solution to keeping your vehicle looking it best and well protected over time. With HEAL PLUS dark colored vehicles will retain their true color and glossy appearance due to the impressive self healing mechanism which vanishes away wash induced love marks and light scratches. HEAL PLUS is thickest and most advanced nano coating available in automotive surface care. In addition to the revolutionary self healing mechanism, the ceramic backbone of SELF HEAL PLUS creates a highly durable protective layer with super gloss and extreme slickness. To sum it up: FEYNLAB® HEAL PLUS adds a super thick, self healing, durable, chemical and U.V. resistant layer to painted surfaces, keeping vehicles looking their best long-term. To activate healing: simply park the vehicle in direct sun where the temperature is 30°C (85°F) or higher and the Ceramic Polymer Matrix will reset. Fine scratches and micro swirls will vanish, revealing a super glossy reflective surface! Product Benefits: FEYNLAB® HEAL PLUS is by far the thickest coating (when IR cured) currently offered on the market, measuring up to 10 microns (with the mean thickness of ~5 microns) with a single application and up to 15 microns when layered appropriately. FEYNLAB’s® true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Key features that distinguish FEYNLAB® HEAL PLUS as unique in the market:
    • Ridiculous Gloss.
    • Extreme Slickness.
    • Outstanding UV Protection.
    • Excellent Chemical Resistance.
    • Durable Long Lasting Protection.
    • Superior Hydrophobic Sheeting & Self Cleaning Properties.
    • Industry Leading Self Healing Ceramic Nano Technology.
    The mechanism behind the self healing effect is a memory polymer woven into a ceramic backbone. When heated, the polymer returns to its original state causing the self leveling effect to occur. HEAL PLUS is only for professional use by FEYNLAB™ Approved and Accredited installers. Do not attempt to apply this product without training. Durability, Warranty & Approved Surfaces: Warranty Period – 7 yrs. Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
    • Clear-coated painted surfaces (see warranty terms and conditions for approved manufacturers & vehicle types
    Application Instructions: Self Heal Plus may only be applied by certified installers. 
  • FEYNLAB® CERAMIC WHEEL AND CALIPER

    FEYNLAB® CERAMIC WHEEL AND CALIPER was developed to protect from harsh conditions of vehicle wheels and turn wheel cleaning into easy mode!. This THICK & Durable ceramic nano coating invites extreme conditions because it was designed for high temperatures and a constant barrage of intense contamination. CERAMIC WHEEL AND CALIPER Benefits: With an extremely high solids content (70%), FEYNLAB® CERAMIC WHEEL AND CALIPER will stand up to the daily beating delivered by road contamination and brake dust. FEYNLAB’s™ true nano technology and bonding chemistry allows for an unparalleled level of protection since the formula penetrates further into the existing paint structure than anything else available. Durability & Application Surfaces: Durability: 1 Year Application includes 1 component layer, reaching an overall film build between 1-2 microns. APPROVED SURFACES FOR APPLICATION ONLY: – DO NOT apply to unapproved surfaces
    • Clear-coated painted wheel rims & calipers
    • Chrome surfaces
    Shelf Life: Unopened – 1 year. Opened – Use within 7 days. Included: 30ml (1oz) FEYNLAB® CERAMIC WHEEL & CALIPER Cautions: Always wear respirator & gloves during application. Ensure application area is free of loose contamination. Paint Preparation: Thoroughly clean wheels & calipers using FEYNLAB® PURE WASH vehicle to remove all topical contamination. Follow with a topical decontamination clay treatment using FEYNLAB® PRIME. If necessary, use a ferrous iron removal product to remove all embedded iron deposits. After cleaning and polishing to desired level, remove all polish oils using FEYNLAB® PANEL PREP to ensure optimal bonding and durability of the coating. Directions: Prior to application place vehicle in a well lit, temperature controlled 10°C-30°C (50°F-85°F), & contamination free environment. Have plenty (6 or more) new microfiber towels, 2 or 3 microfiber sponge applicators, 1 foam applicator on hand BEFORE application. Shake WHEEL & CALIPER vigorously for 2 min before use. Open the bottle and allow the coating 1min of air exposure. CERAMIC WHEEL AND CALIPER – Application Instructions:
    • Apply a small amount of CERAMIC WHEEL & CALIPER to a microfiber applicator and spread evenly over the wheels or calipers. The amount of product should be enough to evenly coat the area without over saturation.
    • Allow CERAMIC WHEEL & CALIPER to dwell for 30-35min. Dwell times over 45 min may require MUCH more removal effort.
    • After application is complete, remove coating in same pattern as application with a Microfiber towel.
    Recommended Maximum Area of Application: Coat 2 full wheels, or 4 wheel faces then wipe off, following the same pattern as application. Best Practice: Combine WHEEL & CALIPER with TOPCOAT. This powerful combination provides wheels with: durable protection, extraordinary hydrophobic and self cleaning traits, and incredible ease of maintenance. Final Inspection: Be sure to carefully inspect all finished panels for any leftover coating residue (high spots) during the final wipe. Commonly edges, emblems, and other tight areas may contain some remaining residue. High spots are much easier to remove if caught within a 20-40 min window after the final wipe, than later when the coating has set and curing has started. Layering: Although one layer of CERAMIC WHEEL AND CALIPER is sufficient to achieve the 1 year durability on clear-coated painted surfaces, another coat may be applied to any area to gain additional thickness. To layer CERAMIC WHEEL & CALIPER, wait at least an hour after final wipe off of first layer. For best results and performance wait 1-3 hours between second later. Do NOT layer after 3 hours. Infrared Curing (Required): Bake each panel with an IR lamp to reach a surface temperature of 60°C (140°F) for 15min at a distance of ~ 30-36″ from the panel. Post Application Instructions:
    • Avoid any incidental water exposure for 24 hours. If it occurs, gently wipe water off the surface.
    • Avoid all chemicals including car washes for 7 days.
    • If the vehicle must be released in wet conditions before 24hrs after the final coating, then apply FEYNLAB® DETAILER after 2-4 hours of curing time.
    • Wash & Maintain using FEYNLAB® PURE WASH or FEYNLAB® PURE RINSELESS.
    Climate Notes: All FEYNLAB® Coatings are subject to different dwell and curing time windows due to humidity and temperature. In General, the higher the humidity level the quicker the coating will cure. If humidity level approaches 75% or higher then consider lessening the recommended dwell and wipe times for the coating. Additionally moving air will decrease coating dwell times for areas it contacts. Therefore, it is recommended to stop all moving air as much as possible during coating applications to ensure consistency for all portions of the vehicle. Coatings are best applied in temperature controlled environments of  10°C-30°C (50°F-85°F), with humidity as low as possible.

Title

Go to Top